(949) 446-1300
HANENBURGDRYWALLHome

FAQs

Drywall Frequently Asked Questions

The questions we are asked most concern cost drivers, project timelines, finish levels, texture matching, dust control, and whether a repair will be visible. Direct answers to all of them are below, grouped by topic.

Drywall FAQ finish levels comparison board, Orange County
Written ScopesDust ControlFinal WalkthroughServing Orange County

Answers

General questions

How much does drywall work cost?
It depends on area, finish level, whether texture matching is needed, access, and how many separate visits the job requires. Finish level is the single largest driver: Level 5 adds a compound coat over every square foot rather than just over the joints. We give written prices after seeing the work rather than phone numbers that change on arrival.
How long does drywall work take?
Drying time rather than labour sets the schedule. Each compound coat must dry fully before the next, usually overnight. A small patch is one to two days, a patch with texture matching is two to three, a single room installation is three to five, and a whole house is one to three weeks.
Do you offer free estimates?
Yes. On site estimates are free across our whole Orange County service area, with no travel charge and no obligation. You receive a written scope naming the finish level so you can compare quotes on equal terms.
What areas do you serve?
All 30 Orange County cities from our Irvine office, including Anaheim, Santa Ana, Costa Mesa, Newport Beach, Laguna Beach, Lake Forest, Mission Viejo, Tustin, and Huntington Beach. There is no travel surcharge anywhere in the service area.
Do you do painting as well?
No. We deliver a genuinely paint ready surface and we are happy to walk it with your painter so both trades agree on the condition before painting starts. Painting is a separate trade.
Can I stay in my house during the work?
In most cases yes. With containment barriers, sealed HVAC vents, HEPA dust controlled sanding, and daily cleanup, disruption stays confined to the work area. For whole house projects or extensive ceiling work there are usually one or two days you would rather be elsewhere, and we tell you which in advance.
Drywall FAQ materials supplies joint compound, Orange County
Drywall FAQ orange peel texture close up, California

Answers

Finish quality and appearance

What is the difference between a Level 4 and a Level 5 finish?
Level 4 covers joints, fasteners, and beads with compound and sands them smooth, leaving the board paper exposed between them. Level 5 adds a thin skim coat over the entire surface. The difference shows under raking light and under any paint sheen above eggshell, where a Level 4 wall displays visible joint banding.
Do I need a Level 5 finish?
You need it if the wall is smooth rather than textured, if it receives strong side lighting from large windows or wall washing fixtures, or if the paint sheen is satin or above. You do not need it on textured walls with flat or eggshell paint, which is most residential work in Orange County. We assess this per room rather than applying one answer to a whole house.
Will my drywall repair be visible?
A properly executed repair should be invisible under normal room lighting once painted. The step that decides this is texture matching, which we do by spraying a sample onto a test board and comparing it against your wall before touching the repair. On a smooth wall under strong raking light, a repair can still be detectable unless the whole wall is skim coated.
Can you match my existing wall texture?
In the large majority of cases yes. We identify the texture type, replicate it on a sample board, and adjust the compound consistency, spray pressure, nozzle, and distance until it matches. Where an exact match is not achievable, usually with hand applied skip trowel, we say so before starting and discuss retexturing the full wall instead.
Why do my drywall cracks keep coming back?
Because they were filled rather than reinforced. Joint compound has almost no tensile strength, so without tape bridging the joint the next seasonal movement reopens the same line. The durable repair is to cut the crack out, bed tape across it, and rebuild the surface in thin coats.
Why do nail pops keep returning?
Because the fastener was never secured. A nail pop is a fastener that backed out as framing lumber dried and shrank. Filling the bump covers the symptom while leaving the loose fastener free to move again. The fix is resetting or replacing the fastener and adding a second screw into solid framing.

Answers

Process, materials, and preparation

Do you offer dustless drywall sanding?
Yes, as standard in occupied homes and operating businesses. Our sanding tools connect to HEPA filtered vacuum extraction that captures dust at the sanding head. Combined with containment barriers and sealed HVAC vents, it keeps the large majority of dust inside the work area. It is not literally dust free, and anyone claiming that is overselling.
What should I do before you arrive?
Remove artwork and anything hanging on the affected walls, take fragile items out of the room entirely, clear a path from the entry to the work area, and take down window treatments. Also tell us about anything you will ever mount on those walls, so blocking goes in before board rather than requiring the wall to be reopened later.
Can water damaged drywall be dried out and saved?
No. Gypsum board that has absorbed water loses its core strength permanently, and the paper facing on both sides becomes a mold substrate. It needs removing back to genuinely dry material and replacing. Sealing the stain hides the discolouration for a few months and does nothing about the compromised board.
Does my popcorn ceiling need asbestos testing?
If your home dates from before the early 1980s, yes, without exception. Sprayed acoustic texture from that era may contain asbestos and scraping it releases fibres. If it tests positive, removal becomes licensed abatement work rather than a drywall job and we refer you rather than proceeding.
Will insulation alone soundproof my wall?
It helps meaningfully but it will not soundproof it. Insulation absorbs sound energy in the cavity but does nothing about vibration travelling structurally through the studs, or about air paths through gaps. Genuine privacy requires decoupling, mass, absorption, and sealing together.
What does paint ready actually mean?
The surface is at its specified finish level, sanded uniform with no ridges at joints or beads, free of gouges and torn paper, and completely free of dust so primer will bond and absorb evenly. It does not mean primed.

Question not answered here?

Call (949) 446-1300 and ask. We would rather answer it now than have you guess, and it costs you nothing.

Written estimates · Texture matching stated up front · Final walkthrough on every job